Membrane Water Wall Collecting Header High Quality Header Boiler Mainfold
Membrane Water Wall Collecting Header Brief Introduction
1. Carbon steel:20G,SA-106B,SA-106C,etc.
2. Low-alloy thermal resistant steel:15CrMoG,12Cr1MoVG,SA-335P12,SA335-P22,etc.
3. Middle-alloy thermal resistant steel:SA-335P91,etc.
4. Special material(ultra-supercritical):SA-335P122,SA-335P92,etc.
Boiler Headers Manifolds Quality Control
1. Impact test and Strength calculation report with applied materials information.
2. 100%NDT(non-destructive inspection) report of steel plate, tube and electrode.
3. X-ray, γ-ray and liquid penetrant test inspection report to ensure the quality of the entire boiler.
4. Hydraulic test report: ensure the standard working pressure and safety.
Materials
1. Carbon steel:20G,SA-106B,SA-106C,etc.
2. Low-alloy thermal resistant steel:15CrMoG,12Cr1MoVG,SA-335P12,SA335-P22,etc.
3. Middle-alloy thermal resistant steel:SA-335P91,etc.
4. Special material(ultra-supercritical):SA-335P122,SA-335P92,etc.
Features
1.Headers form an important part of all types of boilers. Steam from the generating tubes is collected in headers which are therefore always under pressure. This pressure may vary from 300 psi to 2000 psi.
2. Since headers are always under pressure, the utmost care is taken by us while fabricating them. Depending on the generating capacity of the boiler the header sizes fabricated by us vary from 100 mm to 600 mm NB. The stubs of various sizes are very carefully welded to the main body of the header to provide the desired openings from the headers
3. Bevelling and weld preparation of stubs duly tack-welded to the main body of the header are first shown to Chief Inspector of Boilers for his approval and once again the stubs fully welded with main body are shown to Chief Inspector of Boilers under hydraulic pressure, varying from 1000 to 3000 psi as required by the specifications.
4. The headers are stamped by Chief Inspector of Boilers before they leave our manufacturing plant. We also weld skubolets and weldolets in place of stubs.
Specification
| Product Name | Membrane Water Wall Header for boiler |
| Applied Area | boiler membrane water wall |
| Body Material | - Carbon Steel : 20#, 20G, A192, A-1 - Alloy Steel : 15CrMoG, 12Cr1MoVG, T11, T22 |
| Nozzle Tube Material | |
| Standard | China GB, ASME |
| Manufacturer Grade | China A Grade, ABS Certificated, TUV Certificated |
| Working Temperature | depends on material |
| Working Pressure | 1.6 MPa ~ 15 MPa |
| Body Thickness | As per design |
| Body Diameter | As per design |
| Body Length | As per design |
| Welding | SMAW, SAW, GTAW (TIG) |
| Welding NDT | - Body : 100% RT or 100% UT - Nozzle tube > Φ108 : > 20% MT, 100% UT - Nozzle tube <= Φ108 : > 20% MT |
After Painting
Product Tags:
|
|
High Strength Hydronic Boiler Piping Low Alloy Thermal Resistant Images
|
